The Sub20 is meant to reproduce LFE or other low frequency signals above 25Hz in medium sized or larger control rooms. It is equipped with 2 long throw 10" drivers that are mounted at the opposite sides of the cabinet. Due to this alignment the forces applied to the cabinet are opposite to each other and consequently compensate themselves, so that the cabinet stays much quieter than with conventional arrays. Distortion is drastically reduced that way, the clarity of the signal is improved especially at higher levels.
RMS Output Power : 200 W
Height : 22.0"
Additional Information : Panel: Gain, filter adjustment, In- and outputs: XLR symmetrical , RCA non symmetrical,
Standard Warranty : 2 Year
Follow this link to get free express delivery on international orders $100 or more. +More
No code required. Restrictions may apply. Limited time offer.
– less detail
Follow this link to get free shipping on entire order. +More
No code required. Restrictions apply. Limited offer only.
– less detail
Refer a friend. +More
Earn a $25 gift certificate. Click through the link for more details. Ends soon.
– less detail
Follow through and click on the "redeem" button to get an extra $10 discount on your first order worth $150 or more for savings of up to 70%. +More
Restrictions apply. Not valid on Marketplace items. See site for more details. Includes free shipping on select items.
– less detail
Use the code at checkout to save $5 off all orders $50 or more sitewide. +More
Some restrictions apply, see site for details.
– less detail
RMS Output Power : 200 W
PMPO Output Power : 300 W
Minimum Frequency Response : 50 Hz
Maximum Frequency Response : 150 Hz
Impedance : 10 Kilo Ohm
Height : 22.0"
Width : 12.0"
Depth : 32.0"
Weight (Approximate) : 84.00 lb
Additional Information : Panel: Gain, filter adjustment, In- and outputs: XLR symmetrical , RCA non symmetrical,
Standard Warranty : 2 Year